1 / 3
Headphone holder with headphone output (for 6.3 mm jack)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphone holder with output. For mounting under the table.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Headphone holder
with headphone output for 6.3 mm jack. Click here for the 3.5 mm version.
Components you need:
- 1 x Jack Plug
- 1 x Jack socket
- 2 x Screws
- Cable (diameter about 3 mm)
Guide
- Define holder position and cable length.
- Place the audio jack in and push the plate in from the back until it snaps into place, then push it down so that it is blocked and aligned at the top
- Pull the cable through the hole in the back and solder it (socket and plug on the other end of the cable).

- Screw on the holder.
- Arrange cable