P1P Internal Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2k baby monitor stripped and mounted in rear of p1p
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 62
- Wydruki
- 2
- Wyświetlenia
- 1716
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
P1P Internal Camera
- No supports needed
- Print files as downloaded, they are pre-oriented
- 2 covers available for utilizing SD card
- Base has 2 versions, altering viewing angle slightly down to show more build plate
Note: this does not REPLACE the stock camera and is NOT accessible through the Handy app…. just a simple addition, stand-alone camera with its own app for usage (shown below)
Tore apart a 2k baby monitor I found on Amazon daily deals for $16. USB runs through the opening in the rear, or the gap between rear panels if you have a 2 piece full cover. Press fit into holes in rear of machine next to poop chute.
SD card slot on camera. Retains wifi capabilities; plenty of clearance for all machine functions… bed leveling, filament change & wipe, etc.
camera used - https://a.co/d/2xTwDq4
- print parts
- strip camera -
(STICK A SMALL FLATHEAD SCREWDRIVER OR SOMETHING SIMILAR BETWEEN THE BLACK FRONT COVER OF THE CAMERA, AND THE WHITE SIDE HOUSING OF THE CAMERA - IT POPS APART EASY)
- remove housing (camera board is screwed to the white housing) and unplug all items from board minus “IR cut”
- Using a pair of pliers, remove the plastic connector for speaker (“SPK”) This is REQUIRED for proper fit. this will NOT affect anything - shown below
- simply set camera into base, USB port downwards & slide on cover
- press into holes in rear of the printer, plug in.