P1P Internal Camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2k baby monitor stripped and mounted in rear of p1p
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 62
- Makes
- 2
- Views
- 1,716
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
P1P Internal Camera
- No supports needed
- Print files as downloaded, they are pre-oriented
- 2 covers available for utilizing SD card
- Base has 2 versions, altering viewing angle slightly down to show more build plate
Note: this does not REPLACE the stock camera and is NOT accessible through the Handy app…. just a simple addition, stand-alone camera with its own app for usage (shown below)
Tore apart a 2k baby monitor I found on Amazon daily deals for $16. USB runs through the opening in the rear, or the gap between rear panels if you have a 2 piece full cover. Press fit into holes in rear of machine next to poop chute.
SD card slot on camera. Retains wifi capabilities; plenty of clearance for all machine functions… bed leveling, filament change & wipe, etc.
camera used - https://a.co/d/2xTwDq4
- print parts
- strip camera -
(STICK A SMALL FLATHEAD SCREWDRIVER OR SOMETHING SIMILAR BETWEEN THE BLACK FRONT COVER OF THE CAMERA, AND THE WHITE SIDE HOUSING OF THE CAMERA - IT POPS APART EASY)
- remove housing (camera board is screwed to the white housing) and unplug all items from board minus “IR cut”
- Using a pair of pliers, remove the plastic connector for speaker (“SPK”) This is REQUIRED for proper fit. this will NOT affect anything - shown below
- simply set camera into base, USB port downwards & slide on cover
- press into holes in rear of the printer, plug in.