1 / 5
Mini Z MR03 Lenkhebel 1,5° Sturz "Unzerstörbar"!!!! — zdjęcie 1
1 / 5

Mini Z MR03 Lenkhebel 1,5° Sturz "Unzerstörbar"!!!!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Das sind unzerstörbare und perfekt passende Lenkhebel für den MR03 Mini Z

Ocena
0 / 5
Polubienia
13
Pobrania
79
Wydruki
0
Wyświetlenia
681
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Habe hier Lenkhebel für das MR03 Chassis Konstruiert die Perfekt passen.Man sollte allerdings die Pins der Federung umdrehen was aber eigentlich eh jeder macht.Die Welle der Achse sollte man auch mit Sekundenkleber einkleben.

Diese Achsschenkel haben einen Sturz von 1,5° 

Ich habe das ganze auf meinem Bambu Lab X1C mit 0,2mm und 0,4mm Düse gedruckt. Als Material habe ich Eryone TPU 95A genommen was diese Teile dann Unzerstörbar macht.

Wichtig ist das man grundsätzlich TPU 95 nehmen muss weil alles andere nicht hält und es für TPU95 Konstruiert worden ist!!

Wenn ihr das gedruckt habt dann würde ich mich über eine Bewertung und ein Make freuen 

 

English

I have designed steering levers for the MR03 chassis that fit perfectly. However, you should turn the pins of the suspension around, which everyone actually does anyway. You should also glue the shaft of the axle with superglue.

These steering knuckles have a camber of 1.5°

I printed the whole thing on my Bambu Lab X1C with 0.2mm and 0.4mm nozzle. I used Eryone TPU 95A as the material, which makes these parts indestructible.

The important thing is that you basically have to use TPU 95 because everything else won't hold up and it was designed for TPU95!!

If you have printed the part then I would be happy about a rating and a make in the comments.

Tagi