1 / 3
Protective Cap for Livox Mid-360 — zdjęcie 1
1 / 3

Protective Cap for Livox Mid-360

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model is a protective cap that you can put on top of your Livox PMMA dome.

Ocena
0 / 5
Polubienia
4
Pobrania
170
Wydruki
0
Wyświetlenia
857
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

This model is a protective cap that you can put on top of your Livox PMMA dome.
You need :

  • M3x40 (DIN7985) screw
  • M3 (DIN315) wing nut
  • M3 (DIN934) ordinary nut
  • CA Glue + activator.

You need to glue both parts together. 
I recommend to print the cup upside down.

Tagi