Yakima Roof Rack Cap v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an updated version from the original. This has 2mm tick side walls instead of 0.5 and not top pattern.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
New Version:
There has been no problems with the original version as of yet. It has survived a hot summer and still going strong. However, after printing and installing, there were a few tweaks I wanted to make.
- The end edges that wrap around the rack now have a fillet
- Side walls are now 2mm thick instead of 1.5mm
- Design pattern on the face is now removed
Print face down.
Original Posting:
https://www.printables.com/model/551203-yakima-roof-rack-end-cap
Lost an end cap for the Yakima roof rack. Could have bought a replacement cap for $5, but where's the fun in that?!?
Printed in PETG, no supports.
Fits as snug as the original. Added a simple design pattern but could easily be removed if desired. This is the 4th revision, so this one fits as shown in the image.