Vympel R-73 Missile mock-up
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print R73 Missile: 5, 6 & 8mm ID
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is my take on the R73 missile. I made it easy to print without any supports. I made these for my friend's SU35 1100mm wingspan RC plane. I designed it in 3 parts: Nose, Tube & Tail fins. The missile is mounted on SU35's wintips using double sided tape. for that i added a 6mm x 127mm long flat surface for best grip. you can use 2 x 20mm long 5 or 6 or 8mm plastic straw dowels to glue the 3 parts together. you can also chose to insert a full length straw from Tip to tail - this will allow you to use pen compression springs and with a ~4mm pushrod compress those and hopfully launch them using a servo release mechanism or such on an RC plane.
Print settings:
PLA+
230c/60c
100% part cooling
0.2 layer Height
W/ Brim
W/O Infill
W/O Supports.
By downloading these you hereby agreeing to the Arms Trade Treaty :)
“With great power comes great responsibility”
Use these wisly :)