Vympel R-73 Missile mock-up
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print R73 Missile: 5, 6 & 8mm ID
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 64
- Makes
- 0
- Views
- 555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is my take on the R73 missile. I made it easy to print without any supports. I made these for my friend's SU35 1100mm wingspan RC plane. I designed it in 3 parts: Nose, Tube & Tail fins. The missile is mounted on SU35's wintips using double sided tape. for that i added a 6mm x 127mm long flat surface for best grip. you can use 2 x 20mm long 5 or 6 or 8mm plastic straw dowels to glue the 3 parts together. you can also chose to insert a full length straw from Tip to tail - this will allow you to use pen compression springs and with a ~4mm pushrod compress those and hopfully launch them using a servo release mechanism or such on an RC plane.
Print settings:
PLA+
230c/60c
100% part cooling
0.2 layer Height
W/ Brim
W/O Infill
W/O Supports.
By downloading these you hereby agreeing to the Arms Trade Treaty :)
“With great power comes great responsibility”
Use these wisly :)