Slim fan modules for Muldex 3D printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim part cooling fan modules for Muldex 3D printer Details about the printer: https://github.com/3dprintingworld/MULDEX
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original part cooling fan modules of the Muldex 3D printer work very well, but they protrude from the front of the printer, so it makes it a bit difficult to enclose.
Details about the printer: https://github.com/3dprintingworld/MULDEX
Because enclosing the printer is only needed to print high temperature materials which don't require much cooling, I designed slim fan modules which allow easier enclosure and still provide some cooling when necessary.
Each module requires
- 1 “4010” 24V blower fan
- 4 5x3mm magnets
- 4 M2.5x6mm screws
- some glue for the magnets (I used CA glue)
As the fan duct is close to the bed and nozzle, it needs a temperature resistant material. I used a PC blend.
Link to the enclosure: https://www.prusaprinters.org/prints/73379-enclosure-for-muldex-3d-printer