Slim fan modules for Muldex 3D printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim part cooling fan modules for Muldex 3D printer Details about the printer: https://github.com/3dprintingworld/MULDEX
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 517
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The original part cooling fan modules of the Muldex 3D printer work very well, but they protrude from the front of the printer, so it makes it a bit difficult to enclose.
Details about the printer: https://github.com/3dprintingworld/MULDEX
Because enclosing the printer is only needed to print high temperature materials which don't require much cooling, I designed slim fan modules which allow easier enclosure and still provide some cooling when necessary.
Each module requires
- 1 “4010” 24V blower fan
- 4 5x3mm magnets
- 4 M2.5x6mm screws
- some glue for the magnets (I used CA glue)
As the fan duct is close to the bed and nozzle, it needs a temperature resistant material. I used a PC blend.
Link to the enclosure: https://www.prusaprinters.org/prints/73379-enclosure-for-muldex-3d-printer