Type N socket adapter for Sirio car mounted antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Type N socket adapter for Sirio car mounted antenna
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have Sirio magnetic mount car antenna with PL259 socket and i wanted to adapt it to N type socket.
I designed replacement top part with space for N right angle connector.
Depending on the size of the angle socket you find you might have to dremel out small piece of plastic in the center of the bottom(magnet) part.
I recommend printing this upside down(see last image).
This way you will avoid a lot of supports on the inside and you will get nice smooth surface.
This is an experimental design.
I'm not responsible for lost antennas or any damage caused by printed part breaking.