Slightly overengineered Plant holder with different features
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
We would like to plant some raspberries in our kindergarten soon.
So while I was out jogging earlier, I thought about how to attach them. And here is the slightly overengineered solution of mine, how to support the plants without damaging them.
The support can be attached to 1-2 wires with a diameter of up to approx. 3 mm (or ropes).
The plant can then be fixed with a rope or cable tie (up to approx. 4 mm). Optionally, the plant can be prevented from being squashed with the protection and, if necessary, some fabric or foam.
The holder can also be supported from above with another rope/wire. To do this, you can use the opening in the base plate (then mount it upwards) or the eyelet in the brake.
Brake: I have installed a brake so that the holder does not come off sideways. This can be easily mounted and tensioned against the wire with the fastening rope.
I have not yet tested this construction myself :) So who is the first crazy person who dares to do it? :D