Slightly overengineered Plant holder with different features
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plant holder with various features such as a brake and different hanging options
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 24
- Makes
- 0
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
We would like to plant some raspberries in our kindergarten soon.
So while I was out jogging earlier, I thought about how to attach them. And here is the slightly overengineered solution of mine, how to support the plants without damaging them.
The support can be attached to 1-2 wires with a diameter of up to approx. 3 mm (or ropes).
The plant can then be fixed with a rope or cable tie (up to approx. 4 mm). Optionally, the plant can be prevented from being squashed with the protection and, if necessary, some fabric or foam.
The holder can also be supported from above with another rope/wire. To do this, you can use the opening in the base plate (then mount it upwards) or the eyelet in the brake.
Brake: I have installed a brake so that the holder does not come off sideways. This can be easily mounted and tensioned against the wire with the fastening rope.
I have not yet tested this construction myself :) So who is the first crazy person who dares to do it? :D