MG Flux Holder for Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your syringe of Flux and it's plunger, ready to grab and go.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yet another Honeycomb Storage Wall accessory, this one to hold your tube of MG Flux.
Known Compatibility:
Some links below are referral links and using them helps me to keep me publishing free designs for everybody to enjoy, or feel free to leave me a tip on my Ko-fi if you like my work.
Designed to hold my MG Chemicals Flux Paste Dispenser (8341-10ML 8341), and since I don't solder that often, I store mine with the cap back on the tube and the plunger separate so it'll keep for longer. As an added bonus, this also reduces the height of the wall this occupies.
This model needs one “insert-empty” from the original HSW models. (download link)
About this model:
The dimensions for this design are shown in the images, and the front pocket, which holds the syringe, has a 12mm diameter thru-hole in it to allow the tip to hang out the bottom.
If you want a tweaked version of this model to fit your needs, just let me know and I should be able to make one for you easily..
Print it with 2+ walls and 0.2mm layer height. Prints in ~25 minutes, plus the empty insert to mount it.