HDZero Goggle Nose Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shim makes the HDZero Goggle rest on my nose more, resulting in a much more stable fit.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
However good the basic fit of the HDZero Goggle is. It's quite front heavy. For me this meant it kept sliding down. Making it very difficult to keep the image vertically centered and having to readjust constantly. This shim makes the goggle rest on my nose more resulting in a much more stable fit.
Mount it with a small piece of double sided velcro. Best is the ultra thin stuff like on your goggle foam.
Print Settings
Printer Brand:
VoronDesign
Printer:
Voron2 300
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: Recreus Filaflex 85A