Ergonomic stubby screwdriver handle for magnetic hex bit holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A (more or less) ergonomic stubby screwdriver handle, designed to work with generic magnetic hex bit holders.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 310
- Wydruki
- 4
- Wyświetlenia
- 1262
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A (more or less) ergonomic stubby screwdriver handle, designed to work with generic 6.35 mm (= ¼") magnetic hex bit holders of 50 mm overall length. The design incorporates anti-roll elements, as well as a top access hole to push out the bit holder using a screwdriver or hex key.
Tolerances are 0.25 mm all around. For 0.2 mm tolerance, scale X and Y to 98.5%. For 0.3 mm, scale to 101.5%. Detailed dimensions of the generic bit holder are given in the photo gallery.
Print settings
- Layer height 0.2 mm
- Line width 0.42 mm
- Infill 35-45%
- 4-5 wall lines
- 5 top & bottom layers
- Supports not required
Approximate print time @ 60 mm/s: 2:45 h