1 / 19
Minimalistic Card-sized SD Card Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim and portable design that fits easily in any pocket, capable of holding 3 x SD cards. NEW ATTACHMENT & COVER! ♠
- Ocena
- 4,8 / 5
- Polubienia
- 313
- Pobrania
- 1218
- Wydruki
- 22
- Wyświetlenia
- 6125
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 22) (Komentarze: 39)Remiksy (0)Kolekcje (445)Powiązane
Suggested print settings for the Main Body:
- Layer height 0.2mm.
- Infill 20%.
- Perimeters: 5 (for strength and aesthetic).
- No supports are needed.
Suggested print settings for Micro SD attachment:
- Layer height 0.2mm.
- Infill 15%.
- Brim: Width 2mm.
- Brim Separation Gap: 0.2mm.
- No supports are needed but follow the suggested print orientation for ideal results.
Suggested print settings for Cover - Ace of Spade:
- Layer height 0.2mm.
- Infill 20%.
- Perimeters: 5 (for strength and aesthetic).
- No supports are needed.
Changelog
- 19 Oct 2023: New cover design - Ace of Spade.
- 12 Oct 2023: Introduced an attachment that converts one of the SD card slots into a holder for 4 Micro SD cards.
If you appreciate our designs, you can explore more of our gadgets HERE.
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.