1 / 3
Creality k1 spool holder with bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder with bearings for smoother spool rotation.
- Ocena
- 4,545 / 5
- Polubienia
- 193
- Pobrania
- 1330
- Wydruki
- 13
- Wyświetlenia
- 5371
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 13) (Komentarze: 19)Remiksy (1)Kolekcje (267)Powiązane
Spool holder uses:
- 608zz bearings or similiar (8x22x7)
- M8 bolt 8mm (although 10mm is recomended)
- m8 nut with lock (prevents loosening)
- 4x washers (to keep bearings from touching printed parts)
Printed with Protopasta filament with default “creality print” settings for normal pla. 0.2mm layer height.
It should be possible to print it out without supports i used tree support for thread. in late verion plate was added for better possibility for locking mechanism to printer frame.
Before assembly I would recomend to check on bearings if they run freerly and if rubber covers shouldnt be removed on each side of a bearing.