PS4 Controller Universal Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Paga777i model.
- Ocena
- 4,833 / 5
- Polubienia
- 110
- Pobrania
- 773
- Wydruki
- 10
- Wyświetlenia
- 3988
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of Paga777i model.
I've take a shot on this project and made a new back piece for a better usage. Now it comes in 3 different parts that should be assemble together. It's also more strong and makes a better overall feeling all along the back of the controller. The hinge makes putting on and taking off very simply the mount from the controller and make it a lot stable.
New front part design: Better feeling in hands, now it's easier to press the share and options buttons, no more always pressed touchpad (now you can really use it).
For the hinge assembly I used a piece of filament melted on the ends, but you can use any 1.75mm < Ø < 2mm (20mm length) pin. For the ring simply deform it a bit until it goes trough the hole and then push hard until it clicks (see images), repeat for the other side. The back piece should deform a little in the upper part to make its way in the holes of the front piece.
For the last part take a medium size rubber band and put it between the top and the front piece.
Have a nice game!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.2/0.15
Infill:
50% with 5 perimeters
Filament: Anything you like
Notes:
The front (both old and new), the top and the hinge need supports. For the others I suggest using brim.
Category: Video Games