Liczymy pasujące modele…
This is a protector for your PS4 controller (i.e., the Dualshock 4). It covers both analogue sticks, all buttons, and also includes a shroud for the triggers. It is kept in place with a simple strap that is printed flat without any…
A simple, yet curvy, dualshock stand. Includes a slot to route a charging cable. Printed mine in pistachio PETG with 2 perimeters and 25 % gyroid infill, but as its overbuilt it can be made with practically any material and reasonable…
Removes strain from microUSB port and connector from Sony PlayStation DualShock 4 Controller. What have I changed from the original? I have added a locking cap to the very good model from user: creamywhite so that the cable cannot be…
if the printed buttons are tighter than needed, use a scale of 99% or less, depending on the case of the gamepad. Printing with supports
Two part thumbstick extender for game controllers
Dualshock 4 screwed wall mount witch solidedge 2022 files Update May 2026 : Added a V2 that should clear the PS button a little more.
I've downloaded and printed some nice controller stands for my Xbox (PC) controller and Nintendo Switch Pro controller. However, there wasn't one that matched their design available for the official PS3 controller so I designed one myself…
The one remix I've seen looked a bit to shaky to me, so I've decited to make my own one. Big thanks to giufini for this very well designed controller stand! Print instructions Category: Electronics
In addition to my compact wall mount of the PS4, hereby finds a mount for the original Sony Dualshock4 charging station also a wall mount. On the back there is an extra recess for cable routing. This is attached with 2 screws. Print…
Mount for Dualshock 3 compatible with Multiboard push fit points.
Remix of Logann's design, with PS4 logo added, redesigned in Tinkercad.
This adapter allows a high-capacity battery, such as f.e. Li-Poly 4000 mAh, to be connected to a DualShock 4 controller. The high-capacity battery provides extended gameplay for several days. Since the battery cannot fit inside the…
This is replacement for the analog/thumb stick for a playstation dual shock 3 controller. For printing I flipped the model upside down to print without supports at 100% infill. This can be used as is or I used the rubber caps that come…
Mount for the Dualshock 3 that installs on a Honeycomb Storage Wall. Updated to include both style of connectors.
Honeycombstoragewall mount for your DualShock 4 Controller. Нexagon radius 6.505mm, slope 1 degree UPD1 in the comments said that the hexagon is too small, I increased all sides by 0.2 mm UPD2 add 30 ° turned hexagon model My printing…
UPDATE 1/16 - Version 1.1 is unfortunately not a fit properly so a giant disclaimer that this model does not yet function as intended print at your own risk! UPDATE 1/15/25 v1.1 Removed raised area that was causing seating issue walls are…
I want to learn to fly FPV with minimal investment and to be able to translate the hours of training in the simulator with the stick to be as close as possible with a real stick. The plan is to eventually use the exact same omni stics on…
I had to reverse engineer the motor holder that was in my DS1 controller. The plastic was thin and had broke. I did notice that there may have been a slightly different model of this in another early DS1 version. I hope this can work for…
A simple joystick lock for an ps4 controller. The function for this is to be able to put your controller in a bag without getting stick drift.
Single-handedly the best DualShock adapter! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the thumbstick. There is a 4-to-1…
Made with boolean operations in Blender from a 3d scan (https://www.printables.com/model/125924-sony-dualshock-4-3d-scan). You need to print two of theses to hold a single controller, with one mirrored across a plane slicing through a…
PS4 DualShock 4 and PS5 DualSense controller under desk mount 6mm, 8mm glass 19mm table
For more information visit also the github page of the original mount https://github.com/ctu-vras/rcjoy. Hardware required: 2× M3x8 countersunk screws (hex) 1× M3x35 screw (hex) 3× M3 square nuts (tight fit – requires force and cannot be…
This is a protector for your PS4 controller (i.e., the Dualshock 4). It covers both analogue sticks, all buttons, and also includes a shroud for the triggers. It is kept in place with a simple strap that is printed flat without any…
A Multipoint adaptation of the Dualshock 4 controller, that uses 2 multipoint lite - small thread or similar, that is the beauty of multipoint. Another advantage of this way of doing it is, that there is no need for support material It…
Designed for 0.1mm layer height (0.2mm first layer height is fine). No supports required. Use 1mm thick double-sided tape pieces UPDATE: added BSP D9 version with +0.4mm clearance
Since no one else could or if it wasn't possible then I made it possible idk if it works But if it does then let me know
I designed a controller stand featuring the Playstation button symbols with a minimalized footprint. It is recommended to print the model as shown in the photo with supports.
Added a Gridfinity 4 x 2 base to the excellent model by PrimeRetroGamer
This is a wall mount for the PS3 DualShock controller. I have modified the controller mount, so it's fits the wall mount. Go see the original designers of the wall mount back ground and the controller mount. Back ground wall mount:…
The versions I could find online were overcomplicated or plain uncomfortable to use. This is a replacement for a worn thumbstick surface - you will have to peel the old rubber off or it will not fit. Print in flexible filament. Layer…
made this for my son to play with come nice together if the 2 disc is printet in propper tolerances ITS A REMIX OF www.thingiverse.com/thing:3882003 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
A simple, yet curvy, dualshock stand. Includes a slot to route a charging cable. Printed mine in pistachio PETG with 2 perimeters and 25 % gyroid infill, but as its overbuilt it can be made with practically any material and reasonable…
SKÅDIS PS4 controller holder using original IKEA hooks — tidy, secure, space-saving.
SKÅDIS PS4 controller holder using original IKEA hooks — tidy, secure, space-saving.
All parts are pre-oriented for optimal printing Use a lower layer height for best surface finish and consistency Standard materials like PLA or PETG are suitable
Simple wall mount holder for PS4 DualShock 4 controller. Features two L-shaped hooks to hold the controller by its handles. The backplate has two screw holes for easy wall mounting. Print Settings: - Material: PLA / PLA+ recommended -…
Simple controller stand for the PS4 controller/Dualshock 4.
This adapter allows a standard DualShock 4 phone mount to hold your phone in portrait orientation instead of the usual landscape mode. It was specifically designed for the Dobe PS4 Mount Clamp , as many phone mounts available online…
Easy to print 3 part DualShock 4 Controller holder. THIS IS DESIGNED TO MOUNT TO A 50mm THICK SHELF. Feel free to use the provided CAD files to remix it to your own shelf thickness/controller type. This would probably work with other…
I 3d Scan of my old broken PS4 DualShock 4's L2 trigger, D-pad, and top main body. I have not printed it yet, but please do let me know if you do. I cleaned up the main body as best I could before I stopped caring, about 3 hours in. The…
None of my other display stand models could accommodate a Playstation DualShock controller so I designed one that will fit DualShock 1-3 controllers. As per all of my other models, I used as little filament as possible while still…
This is a simple wall mount for a ps4 controller, others i tried were a little wobbly and I wanted to mount it on a cabinet door, so this holds the controllers snug, with the back of the controller facing out for easy access to the…
A simple and invisible holder for a DualShock controller you can mount on a 8020 simrig or a wall.
Elevate your gaming setup with the Zfold 3 Phone Adapter. Designed with precision, this adapter is tailored to fit your Zfold 3 smartphone perfectly, allowing it to effortlessly slot into the PS4 DualShock controller phone mount. Say…
This is a stand for 2 ps3 DualShock3 controllers with integrated usb hub. Im using a cheap (from ebay) usb 4 port hub - (last photo) to connect my controllers dongle. Assembly - 1 disassemble your usb hub 2 check if the down side of the…
This buttons are for Aftermarket PC controllers - that are knockoffs of DualShock 3/4, i recently got a pair of them for my couch co-op pc. As a pc gamer i`m not used to console button layouts so i made a this remix of DualShock 3 buttons…
I just modified slightly Driz work, all original credits go to him and MakingZone. Category: 3D Printing
Inspired by a design from Nicholas Piegdon: https://www.youtube.com/watch?v=8qTx_9HK7IM Used 3D scans from: https://bitbuilt.net/forums/index.php?threads/ps2-dual-shock-2-controller-scan.5088/
I remixed in solidworks the one made for Xperia z, this one fits my Oneplus One with it's Tudia Spigen case. Hope you like it. Category: Mobile Phone
Simple wall mount for Dualshock 4 controller. uses only one screw as I was hesitant to drill more than required. Turns out that one screw is more than enough. Step and Fusion 360 files available for you to modify! Support You can support…
Ever wish you could attach a mini display to your PS4 gamepad? With 3D printing, you totally can! This 3D printed mount attaches a 7" HDMI 1200x800 display to a Playstation 4 DualShock wireless controller.…
Gedruckt mit PLA auf 100% Infill. Es werden zusätzlich ein Haargummi und zwei kleine Gummibänder benötigt.
English Simple mount for dual shock or PS4 controllers to put under your gaming desk, or your coffe table. It uses its joysticks as a holding points. Used to hold one controler at a time. To be hones Iam not sure if this may damage the…
If you own more DualShock 4 controllers for your Sony Playstation 4, this is the perfect solution to keep them well organized. This multiple stand is very compact and you can even place it just above the Playstation 4. It allows easy…
Two sided and keyhole versions available. A modified version of the Xbox controller wall mount . For best strength and quality, print sideways. Dualsense PS5 Xbox (One + Series X/S) Xbox Elite Series 2 (Coming soon, premium)
Updated to V3. I added the pegs from my SNES Skadis mount that I designed from scratch that adds a third centered peg underneath the top 2 for extra support. It should feel much more secure.…
Print notes: I print it the upside facing up. So it needs support for the bottom of the main body, as it cannot directly bridge across that face as there is a vent slot in the middle. To save filament, you can just use a box of support…
To assemble you will need to print our nut hammer and 4, 10x32 nuts and ½" screws If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay -…
(PS4) Playstation 4 dual shock controller holder for honeycomb wall with gamging sign on front of the holder. Slight modification of model which i cant find right now.
Created via modification of original 'dualshock 4' design by Saba.Lanchava found on his sketchfab page ( https://sketchfab.com/Saba.Lanchava ). All support & credit should be directed towards the orignial designer Saba I simply deleted…
One of my first projects is this PS3 controller stand with the function of storing your UBS cable as well… Eines meiner ersten Projekte ist dieser Ständer für PS3 Controller mit dem sich auch das USB Kabel verstauen lässt…
I recommend to print this standing on one surface at the Bottom like one of the pictures show. It might work best if the inner gap is facing upwards. I printed mine on an Ender 3 S1 with - Fillamentum Wizards Voodoo PLA - 210°C - 0,08mm…
This will fit most controllers Printed in PLA Infill 20% Tree support = Draw a block under the insert (slicer 2.6 alpha-5)
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Stand for dualsense ps4 God of War Limited Edition controller
Wall Mount for a Dualshock 4 (or similar sized) controller. The mounting holes are intended for use with 1.6mm nails, for use with larger nails or screws the holes would have to be expanded. Holes can be widened to ~5mm max without…
Wall mountable PS4 DualShock controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This has 2 pieces that must be printed and…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Wall art based on one of the patent drawings for the PS5 DualShock controller. Tiny details print best with a .25mm nozzle instead of the stock .4mm. The backing is very thin so that the print doesn't use too much filament, or take too…
This is a USB cable guard for Sony PlayStation Dualshock 4 that clips onto the controller. It is designed to hold original PlayStation 4 microUSB cable firmly when it's connected to Dualshock 4. This removes strain from microUSB port and…
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Akkuhalter für den Dualshock 4 V1 Controller und einem günstigen Chinaakku mit JST PH2 Anschluss. Hier gibt es verschiedene Versionen der Stecker. Bitte erst nachschauen welcher vorhanden ist. Der Halter wird einfach mit doppelseitigem…
An hanger if you want to place your controller on your vertical PS4
2 diferent modules Remixed from a screw holder
Easy and fast to print thumbsticks for the Dualshock 4 controller.
I wanted to get a more accurate experience when using drone simulators, but only had my playstation controllers. This little piece sticks onto the sticks of the controller to make them feel a lot more like a real radio controller for…
My first 3d modelling attempt/modification, I printed with supports to baseplate which may or may not be needed. The screw is from https://www.thingiverse.com/thing:2076034 - I attached the short one just for practicality sake but it's…
Mounting hardware for range extender of DualShock 4 controller with universal DS4 zip-tie attachment. The long range capability can be done adding RC joystick module from https://github.com/ctu-vras/rcjoy . System is fully see-through and…
Here are the settings I've used on my Ender 3 with Prusa Slic3r: 0.16 layer height - makes it stronger and nicer; organic support material for the hooks - you could also use grid, doesn't change much; grid infill 15% - any pattern could…
For mounting dualshock 3 controllers to walls. Also fits wireless dualshock 2 controllers as you can see in the picture.
Basicaly an overengineered PS4 controller stand Derived from a 3D scan - https://www.printables.com/model/125924-sony-dualshock-4-3d-scan/remixes - Thank you I provided a full stand file so the optimised one can be used as a mesh modifier…
I remixed this very nicely fitting PS3 Controller mount by @araymbox to have hooks for the IKEA skådis pegboard.
One of the triggers was broken on my PS4 controller, and I decided to 3D model some new ones instead of replacing them with generic replacements. These are flat replacement L2 and R2 buttons for the first gen PS4 controller (CUH-ZCT1).…
Flight yaw pedals for Akaki's HOTASSet. With the bigger printer (X5S) you can print the platform Body as a one piece, for the smaller ones use the L&R halfs and the connetor bar. You'll also need extra parts: +1m length 4/2mm bowden-tube…
Simple remix of the Dualshock 4 attachments from @p0tty to go with the backplate from Naten11 The original was too thick, so I slimmed it down to fit perfectly with the backplate. I also made a remix of the orignial backplate without logo…
A universal smartphone mount for DUALSHOCK 4 (PS4 controller) I made Any modern smartphone can be held securely using a screw mechanism fully printed needs support structures The joints can be attached with 1.75 filament
Removes strain from microUSB port and connector from Sony PlayStation DualShock 4 Controller. What have I changed from the original? I have added a locking cap to the very good model from user: creamywhite so that the cable cannot be…
These are flat replacement L1 and R1 buttons for the first gen PS4 controller (CUH-ZCT1). The buttons are not modeled to be exact replacements, they are flat and chamfered on the front, both as I wanted something that was a bit nicer to…
