Sony Playstation DualShock Controller Thumbstick Caps different designs for PS4 and PS2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement thumbstick rubber caps for Sony Playstation PS4 and PS2 Dual-Shock Controller, different designs
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
The thumbstick rubber caps from my Sony Playstation (c) controllers for the PS2 and PS4 became greasy and sticky. So I designed these caps with different symbols.
Printed on my Prusa MK3 and Textur printsheet, with filament Overture TPU 95A. To get the caps a little bit more soft I reduced the solid bottom and top layer to a maximum of 3 in the slicer, Gyroid infill 50%.
These caps are not designed to place over the original ones, they are a complete replacement. The original caps are easy to remove, tested on a couple of PS2 and PS4 controllers.
With my printer, filament and slicer settings the caps fit fine. When you need to adjust simply scale up or down x+y, or z in your slicer.
"All brand names and trademarks mentioned herein—which may be protected by third parties—are subject in their entirety to the provisions of the applicable trademark law and the ownership rights of the respective registered owners. The mere mention of such marks should not be taken to imply that they are not protected by the rights of third parties."