1 / 4
IKEA KROKFJORDEN shower basket holder - replacement for suction cup
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our IKEA shower basket has constantly fallen off because of the suction cups. This model mounts to the shower bar.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
we have always used an IKEA KROKFJORDEN shower basket in the past, which was attached to the wall with two suction cups. However, this has constantly fallen off.
Therefore, I have now designed a holder for the shower rod.
It consists of 4 parts:
- the two rear parts that wrap around the shower rod.
- the front part which connects the shower basket with the rear parts and also holds them together at the same time.
- a small part that prevents the basket from tipping too far away from the wall.
The shower bar is from Hansgrohe. The base is 22,4mm wide and 50,5mm high. The bar itself is 22mm in diameter and 52mm from the wall.
For the assembly are needed
- 2x M4x16mm screws (12mm also works)
- 1x M4x12mm screw (for connecting the left and right part at the top)
- 3x M4 nut