Replacement Trash Can Bag Retention Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bag retention insert for Sooyee 14L (3.7 Gal) rectangular bathroom/office trash can.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Accidentally tossed the insert for my trash can mistaking it for a failed print, so I created a replacement. This one is much sturdier and a better fit than the original which was very warped and barely fit to begin with. This is designed to specifically fit Sooyee 14L (3.7 gal) trash can (amazon link). If your trash can is rectangular and matches the following dimensions: 10"L x 6.8"W x 13.5"H this it should work for you, if not I've included the STEP file so you can modify to fit yours.
Print Settings:
Printer: Bambu Lab P1S
Filament: Creality Hyper PLA
Layer Height: 0.28mm (Extra Draft)
Nozzle: 0.4mm
Wall Loops: 5
Top/Bottom Layers: 4
In-Fill Density: 100%