tt02 threaded tierod angle kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
kit for tt02 that uses threaded tierods and a few 3d printed parts to enhance angle.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
this is my (bad) ripoff of the mrc (matrix racing club) tt02 steering mod. all you need to build is this 3d printed steering, a threaded rod kit, and stronger springs, (are links at bottom) as well as the part that come on your tt02. when you print all the parts you will need to cut the plastic threaded rods shorter so that you don't have a 2 inch wide body. it is A lil wobbly and some of the holes for the threaded rods are a little small (I fixed this with some *green stuff* linked at bottom) but other then that it was not that hard to put together.
threaded rod kit https://a.co/d/egSSkB2
matrix racing club mrc.jpn.com
stronger springs https://a.co/d/6gdcgDy
green stuff https://a.co/d/7mFgj65
thx!(i have edited some of the models i hope the improvements help your builds) i also want to say one of the part the (top strut tower) is a remix of this https://www.thingiverse.com/thing:5965078 i just want to say all credit do.