1 / 6
Cyberstand phone mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rigid phone mount designed to provide a stable mount to use a phone in portrait mode while plugged in.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
The Cyberstand is a shallow and rigid phone mount designed to provide a stable mount to use a phone in portrait mode while plugged in. I designed this to fulfill my specific needs as a mobile app developer:
- A relatively shallow phone angle of 35 degrees, to comfortably rest on a table next to a keyboard while keeping the phone facing you
- A cable notch at the bottom so you can keep your phone plugged in
- A large, rigid, and geometric shape for solid support so you can tap anywhere (within reason) without the phone flipping or sliding off the stand
Furthermore, to optimize material usage and print time, it's designed to print on its side without any supports required. The attached photos took about 5h30m to print, at PrusaSlicer's 0.20mm Quality preset.