Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief
- Ocena
- 4,5 / 5
- Polubienia
- 104
- Pobrania
- 665
- Wydruki
- 2
- Wyświetlenia
- 4340
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch.
Note: I do not use a cable cover (didn't want extra weight) so the existing ones probably will not fit this.
I printed this using PET-CF and only used 2 walls and 15% gyroid infill to save some weight. Only around 11g.
You will also need the follow:
- 3 standard 3mm insert that Voron builds already used
- 2 m3x8 or m3x12 for the clamp
- PG7 cable gland (https://www.amazon.com/gp/product/B07DH9QNCM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
On the other end of this cable, I have a CNLINKO LP-12 connector. If there are interest, I can upload that as well.
Step files are included, so mod away!