1 / 5
MMU3 Selector Front Plate w/M5 Tee-Nut & w/snap out print support — zdjęcie 1
1 / 5

MMU3 Selector Front Plate w/M5 Tee-Nut & w/snap out print support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M5 T-Nut and Festo connector to make your own Selector Plate without the special melted-in brass female fitting.

Ocena
5 / 5
Polubienia
8
Pobrania
41
Wydruki
1
Wyświetlenia
519
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Need to print your own MMU3 selector plate in a color other than black?

You'll need an M5 T-Nut (flat) and an M5 Festo connector.

Model has a built-in snap-out print-support.

I didn't do this, but you can drill out the Festo connector a little more, also chamfer the input side of the Festo hole (thread side) if you feel / or want a larger input hole.

I printed .4mm nozzle, .2mm layer height with stock MK4 “Quality” profile.

Note: Once installed you can remove the Festo connector to check aligment of the plate with the Selector output hole, see image in the uploaded photos.

Tagi