1 / 5
MMU3 Selector Front Plate w/M5 Tee-Nut & w/snap out print support — image 1
1 / 5

MMU3 Selector Front Plate w/M5 Tee-Nut & w/snap out print support

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

M5 T-Nut and Festo connector to make your own Selector Plate without the special melted-in brass female fitting.

Rating
5 / 5
Likes
8
Downloads
41
Makes
1
Views
518
Reviews
1

Updated at source:

Model information

License
GNU General Public License v2.0

Need to print your own MMU3 selector plate in a color other than black?

You'll need an M5 T-Nut (flat) and an M5 Festo connector.

Model has a built-in snap-out print-support.

I didn't do this, but you can drill out the Festo connector a little more, also chamfer the input side of the Festo hole (thread side) if you feel / or want a larger input hole.

I printed .4mm nozzle, .2mm layer height with stock MK4 “Quality” profile.

Note: Once installed you can remove the Festo connector to check aligment of the plate with the Selector output hole, see image in the uploaded photos.

Tags