1 / 6
Chrysler Imperial Crown Convertible Horn Contact — zdjęcie 1
1 / 6

Chrysler Imperial Crown Convertible Horn Contact

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I helped a friend reproduce a replacement very rare 1965 Chrysler Imperial Crown horn spring contact part.

Ocena
0 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I helped a friend reproduce a replacement very rare 1965 Chrysler Imperial Crown horn spring contact part.

I don't know much about the car but the original bakelite plastic from 1960's melted and it's such a rare car that nobody made a replacement for these. Behind the steering wheels is a disc for the horn contact to slide on while it's rotating and the paddle of the horn ring presses against the spring contact completing the circuit to chassis ground.  

I printed the prototype in Sirayatech Blu SLS resin to test fit it, then I sent it to xometry.com for printing in SLS nylon. I had a friend turn the pins out of brass on a lathe, but you could get these metal sintered or use the original pins. The spring is a McMaster 0.12"diax1"long compression spring (https://www.mcmaster.com/8969T124/)

Tagi