Chrysler Imperial Crown Convertible Horn Contact
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I helped a friend reproduce a replacement very rare 1965 Chrysler Imperial Crown horn spring contact part.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I helped a friend reproduce a replacement very rare 1965 Chrysler Imperial Crown horn spring contact part.
I don't know much about the car but the original bakelite plastic from 1960's melted and it's such a rare car that nobody made a replacement for these. Behind the steering wheels is a disc for the horn contact to slide on while it's rotating and the paddle of the horn ring presses against the spring contact completing the circuit to chassis ground.
I printed the prototype in Sirayatech Blu SLS resin to test fit it, then I sent it to xometry.com for printing in SLS nylon. I had a friend turn the pins out of brass on a lathe, but you could get these metal sintered or use the original pins. The spring is a McMaster 0.12"diax1"long compression spring (https://www.mcmaster.com/8969T124/)