ShineNow Heat-set Insert Tips Gridfinity Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick bin I put together to organize some heat-set insert tips that I use with a soldering iron.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 211
- Wydruki
- 5
- Wyświetlenia
- 1349
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A very quick bin I put together to organize some heat-set insert tips for my soldering iron.
My main constraint was size. I always work with tweezers when dealing with heat-set inserts. As a result the bin is the smalles I could make everything fit: 1 row, 2 columns, ½ height.
Hardware
- I use the ShineNow heat-set insert tips (reference)
- With a generic and cheap soldering iron (reference)
No magnets holes
I filled in the magnet holes so I could make everything fit without having to go to a full height bin.
Customization
Included is the Fusion360 file, but note that it is a bit messy. I did not try and cleanup the file or the operations.
Printing
No supports. The files are optimized for 0.6mm nozzle and I personally print them with a 0.35mm layer height out of PLA. This should print fine with a 0.4mm nozzle as well.
Attributions
I started the bin from this specific template by KptnAutismus.