Cute Tiger (HueForge)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament painted using HueForge software, printed with 4 colors PLA. No AMS or MMU required.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 138
- Wydruki
- 2
- Wyświetlenia
- 1393
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
In the comments of my Low Poly Unicorn I noticed that your kids love it. So I made a painted unicorn, which is primary for the girls. So I needed to make something for the boys. Here it is.
You need 4 filaments to print/paint this 2D tiger: black, red, yellow and white. You just have to swap the filament 3 times, so no AMS or MMU required.
I used Bambu Lab Filament, but other brands will work, too.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #29 (2.4mm) swap to White for the rest.
Generated using the HueForge software! See videos with instructions for filament swaps with Bambu Studio and PrusaSlicer …
… or try the included .3mf file.