JLAB JBuddies Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JLAB Kids' JBuddies over-ear to headband connector
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the first model I have developed. This is a replacement piece for the connector that connects the over-the-ear portion to the headband on JLAB Kids' JBuddies headphones. I struggled with bed adhesion so I would recommend printing a brim or raft to aid with that supports are not required for this print but they do make the hole for the screw a lot cleaner. If using them I recommend using PrusaSlicer “Paint-on supports” and only add them to the center area with the screw hole.
This was printed on an Ender 3 Neo.
0.4mm Nozzle
40mm/s speed
PLA, PLA+, or PETG
This print takes less than 10 minutes to print.
I hope others are able to save their children's headphones with this.