JLAB JBuddies Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
JLAB Kids' JBuddies over-ear to headband connector
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the first model I have developed. This is a replacement piece for the connector that connects the over-the-ear portion to the headband on JLAB Kids' JBuddies headphones. I struggled with bed adhesion so I would recommend printing a brim or raft to aid with that supports are not required for this print but they do make the hole for the screw a lot cleaner. If using them I recommend using PrusaSlicer “Paint-on supports” and only add them to the center area with the screw hole.
This was printed on an Ender 3 Neo.
0.4mm Nozzle
40mm/s speed
PLA, PLA+, or PETG
This print takes less than 10 minutes to print.
I hope others are able to save their children's headphones with this.