Spinning Wheel Picker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spinning wheel to pick a number between 1 and 20.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is to make a selector wheel to pick randomly from 1-20. It is designed for ABS but should print well out of any relatively rigid filament (with some scaling adjustments). The “flapper” was printed out of 85A TPU with 100% infill. It will need 1 - 608 bearing and 21 - M3x30 bolt head cap screws. I also used heat set inserts for the screws, specifically, the M3x3 insets from CNC Kitchen. I used a drop of glue to hold the flapper in as well as the center plug to the bearing. The 2 color wheel is just a simple filament swap after layer 20 (if printing at 0.2mm layers).