Spinning Wheel Picker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spinning wheel to pick a number between 1 and 20.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 150
- Makes
- 0
- Views
- 1,365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is to make a selector wheel to pick randomly from 1-20. It is designed for ABS but should print well out of any relatively rigid filament (with some scaling adjustments). The “flapper” was printed out of 85A TPU with 100% infill. It will need 1 - 608 bearing and 21 - M3x30 bolt head cap screws. I also used heat set inserts for the screws, specifically, the M3x3 insets from CNC Kitchen. I used a drop of glue to hold the flapper in as well as the center plug to the bearing. The 2 color wheel is just a simple filament swap after layer 20 (if printing at 0.2mm layers).