1 / 6
Build Plate Adaptor (-4mm) for Magnetic Plate for ANYCUBIC Photon Mono M5s — zdjęcie 1
1 / 6

Build Plate Adaptor (-4mm) for Magnetic Plate for ANYCUBIC Photon Mono M5s

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This shorter adaptor replaces the connector so that the magnetic plate is at the same height as the factory build plate.

Ocena
5 / 5
Polubienia
12
Pobrania
108
Wydruki
0
Wyświetlenia
1322
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

UPDATE:  After several months using this, it works fine, but I had to retighten the screws I used once, just make sure your screws are well tightened and it should be fine.

 

Build Plate Adaptor for Magnetic Plate for ANYCUBIC Photon Mono M5s

This shorter adaptor, 4 mm shorter, replaces the connector so that it compensates for the thickness of the magnetic plate, which will stay at the same height as the factory build plate.

Attention, the 2 screws need to be reduced accordingly or shorter screws are needed to that this will work.  I used Screws 4x35 DIN 912 ISO 4762 Uni 5931.  But I imagine you could just reduce the original screws around 4mm with a carborundum or diamond cutting disc and sand paper.

you can also try a slightly larger *1mm Flexible Build Plate like this:

 Saturn 2.  “Flexible Spring Steel Resin Build Plate 224x129mm”  Amazon link:  https://www.amazon.com/dp/B0C2C3DJRB

 

 

I think the original build plate is at this dimension:  218 x 123 x 200 mm

The Anycubic Photon Mono M5s is the first levelling-free resin printer for the home! With 12K resolution and a build volume of 218 x 123 x 200 mm, it allows you to turn the most creative ideas into reality. https://www.3djake.com/anycubic-3d-printer-and-accessories/photon-mono-m5s#:~:text=The%20Anycubic%20Photon%20Mono%20M5s,most%20creative%20ideas%20into%20reality.