1 / 6
Build Plate Adaptor (-4mm) for Magnetic Plate for ANYCUBIC Photon Mono M5s — image 1
1 / 6

Build Plate Adaptor (-4mm) for Magnetic Plate for ANYCUBIC Photon Mono M5s

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This shorter adaptor replaces the connector so that the magnetic plate is at the same height as the factory build plate.

Rating
5 / 5
Likes
12
Downloads
108
Makes
0
Views
1,325
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

UPDATE:  After several months using this, it works fine, but I had to retighten the screws I used once, just make sure your screws are well tightened and it should be fine.

 

Build Plate Adaptor for Magnetic Plate for ANYCUBIC Photon Mono M5s

This shorter adaptor, 4 mm shorter, replaces the connector so that it compensates for the thickness of the magnetic plate, which will stay at the same height as the factory build plate.

Attention, the 2 screws need to be reduced accordingly or shorter screws are needed to that this will work.  I used Screws 4x35 DIN 912 ISO 4762 Uni 5931.  But I imagine you could just reduce the original screws around 4mm with a carborundum or diamond cutting disc and sand paper.

you can also try a slightly larger *1mm Flexible Build Plate like this:

 Saturn 2.  “Flexible Spring Steel Resin Build Plate 224x129mm”  Amazon link:  https://www.amazon.com/dp/B0C2C3DJRB

 

 

I think the original build plate is at this dimension:  218 x 123 x 200 mm

The Anycubic Photon Mono M5s is the first levelling-free resin printer for the home! With 12K resolution and a build volume of 218 x 123 x 200 mm, it allows you to turn the most creative ideas into reality. https://www.3djake.com/anycubic-3d-printer-and-accessories/photon-mono-m5s#:~:text=The%20Anycubic%20Photon%20Mono%20M5s,most%20creative%20ideas%20into%20reality.