Ryobi P770 Wet/Dry Vac Replacement Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place Ryobi #P770 Wet/Dry Shop Vac 18V Replacement Latch for securing the top to the basin.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 426
- Wydruki
- 1
- Wyświetlenia
- 2008
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One of the latches on my Ryobi 18V Cordless Wet/Dry vac came off and got lost. I modeled a fully printable replacement that feels a lot like the original, but is easy to 3d print and is strong when printed in ABS or ASA.
I used supports under both shafts and the tab that inserts into the top slot. See the image with arrows to see where I added support.
This prints perfectly and works flawlessly, but I've included the original f3d file if anyone wants to modify.
I also included the 3mf model instead of STL. 3mf is great for printing precision parts because it includes geometries which makes prints more accurate.
I printed my replacement in black ABS at 0.2mm layer height with a 0.4 nozzle and selective support and it came out perfect! I also used a little acetone to smooth out the shaft that goes into the bottom and added a little silicone lubricant to make it last. Enjoy.