R2-D2 Center Foot Support Upgrade (for Mr. Baddeley's Version 2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an upgrade to the center foot support for Mr. Baddeley's Version 2 R2-D2. \
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 566
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an upgrade to the center foot support for Mr. Baddeley's Version 2 R2-D2. I found the original support to be a little too flexible. I modeled this after the Mark III design. However, I added even more cross bar support to make it even stiffer than the Mark III. This upgrade will require longer bolts.
I printed with PETG six perimeters, 35% infill, and .2 layer height.
4 M4 70mm bolts - To bolt the foot to the base plate.
8 M6 60mm bolts - To bolt the base plate to the body and skirt.
1 M4 40mm bolt with a flat head (it gets inserted between the top of the foot and the bottom of the support.)
Category: Robotics