R2-D2 Center Foot Support Upgrade (for Mr. Baddeley's Version 2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an upgrade to the center foot support for Mr. Baddeley's Version 2 R2-D2. \
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 97
- Makes
- 1
- Views
- 566
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an upgrade to the center foot support for Mr. Baddeley's Version 2 R2-D2. I found the original support to be a little too flexible. I modeled this after the Mark III design. However, I added even more cross bar support to make it even stiffer than the Mark III. This upgrade will require longer bolts.
I printed with PETG six perimeters, 35% infill, and .2 layer height.
4 M4 70mm bolts - To bolt the foot to the base plate.
8 M6 60mm bolts - To bolt the base plate to the body and skirt.
1 M4 40mm bolt with a flat head (it gets inserted between the top of the foot and the bottom of the support.)
Category: Robotics