Socket frames for Philipps Hue dimmer switch V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V1.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 1053
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V1. I made three versions for single, double and triple frames.
The versions for double and triple frames are designed for a plug in the lower hole and one or two switches in the upper part. Therefore the edge in the lower hole is higher to fit the plug properly.
I made two single versions, one for using with a switch and one for using with a plug (if someone really needs this).
Printed with supports from build plate only.
The base for attaching the dimmer switch was taken from the model Philips_Hue_Dimmer_base of stevenverpoest on Thingiverse (https://www.thingiverse.com/thing:2128122).