Socket frames for Philipps Hue dimmer switch V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V1.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 93
- Makes
- 0
- Views
- 1,053
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V1. I made three versions for single, double and triple frames.
The versions for double and triple frames are designed for a plug in the lower hole and one or two switches in the upper part. Therefore the edge in the lower hole is higher to fit the plug properly.
I made two single versions, one for using with a switch and one for using with a plug (if someone really needs this).
Printed with supports from build plate only.
The base for attaching the dimmer switch was taken from the model Philips_Hue_Dimmer_base of stevenverpoest on Thingiverse (https://www.thingiverse.com/thing:2128122).