1 / 4
Flower Pot and Planter Voronoi for plants Succulent
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative flowerpot
- Ocena
- 5 / 5
- Polubienia
- 159
- Pobrania
- 756
- Wydruki
- 2
- Wyświetlenia
- 3294
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (201)Powiązane
- I recommend a nozzle of max 0.5 mm, layer max 0,25
- You can print without supports, or use supports at the bottom if you have poor airflow.
- I recommend PLA because it leaves few threads.
If the print is successful, share your photo :)