Wash and Cure 2.0 adapter for Wash and Cure Plus station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place a Wash and Cure 2.0 container on top of a Wash and Cure Plus station. Now it works absolutely fine!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
If you want use the container of a wash and cure 2.0 for usage with a wash and cure plus, then you need this adapter agitator, you have to use a material which is resistant to IPA or water.
For IPA I recommand using PP or PA. If you take a bit more care about it, you can also use PETG. Please check out the resistance graph below:

Source: Prusament.com
For assambly you need the folowing parts:
Place the bearing firstly into your agitator. Use a flat surface to press it in. Afterwards, place the heat inserts into your printed part. Then you can insert the magnets and screw it into the threads with the bolts.
Als Amazon-Partner verdiene ich an qualifizierten Verkäufen