Ikea LÄTT Chair Crossbeam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement crossbeam for an Ikea LÄTT (Latt) chair. Will fit both left and right sides of chair.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you dealing with a broken or missing crossbeam on your IKEA LÄTT chair? Don't worry; you're not alone. I faced the same issue and decided to take matters into my own hands. I've 3D-printed a sturdy replacement that fits perfectly.
I printed on my AnyCubic Kobra Go, had to print diagonally to fit on the bed.
- Filament Type: PLA
- Layer Height: 0.35 mm
- Infill: 50%
- Infill Patter: Triangles
- Temperature: 190°C (Extruder), 60°C (Bed)
- Print Speed: 60 mm/s
- Sliced: on PrusaSlicer
- Print Time: 13 hours 13 min
I used tree support but still had some overhang issues so may want to have more support.
This was designed in Sketchup as its what I am most familiar with. One thing to note is the metal round I guess you would call them nuts are a “perfect” fit. I had to hammer them in. which did give me reassurance it was strong enough to support a child.
Two weeks since fixing the chair and no issues with the design.