1 / 4
TPU Foot Pad for the [Prusa] Box enclosure by Printer Box — zdjęcie 1
1 / 4

TPU Foot Pad for the [Prusa] Box enclosure by Printer Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU pad for the marvelous Prusa-Box enclosure by Printer Box [ https://www.printer-box.com/ ]

Ocena
4,833 / 5
Polubienia
24
Pobrania
105
Wydruki
6
Wyświetlenia
995
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here is a TPU pad for the marvelous [Prusa]Box enclosure by Printer Box 
https://www.printer-box.com/
I've designed this pad for two reasons: 
- The enclosure wil be less slippy on there feet
- It could also avoid the transmission of vibration to the desk or shelve on which the enclosure rests
 

Christian Refle settings for Sunlu TPU:
0.20 mm layer
3 Outlines
Infill 20 %
 

Thanks to Christian Refle for the pictures because I haven't printed these pads yet, as I'm waiting for the delivery of a TPU roll in order to do so ;-)

Edit: I've received my Eryone TPU roll and printed these pads and here are my settings for Eryone TPU Shore 95A:

0.20 mm layer
2 Outlines
Infill 15 %
Nozzle Temp. 230-220°C
Bed Temp. 60-70°C
Max speed 25 mm/s
(Last picture added is a pad I've printed)
----------------------------------------------------------------------------------------------------------------

Voici un tampon TPU pour le fantastique caisson [Prusa]Box de Printer Box
https://www.printer-box.com
J'ai modélisé ce tampon pour deux raisons :
- Les pieds du caisson seront moins glissants
- Ce tampon peut aussi éviter la transmission des vibrations au bureau où à l'étagère sur lequel est posé le caisson
 

Paramètres de Christian Refle pour le TPU Sunlu
Couche 0.20 mm
3 Périmètres
Remplissage 20 %

Merci à Christian Refle pour les photos car je n'ai pas encore imprimés ces tampons étant donné que j'attends la livraison d'une bobine de TPU pour pouvoir le faire ;-)

Edition : J'ai reçu ma bobine de TPU Eryone Shore 95A et j'ai donc imprimé ces tampons, voici les paramètres que j'ai utilisé :
 

0.20 mm layer
2 Périmètres
Remplissage 15 %
Température Buse 230-220°C
Température Lit 60-70°C
Vitesse maxi 25 mm/s
(Dernière photo ajoutée montre un tampon que j'ai imprimé)

Tagi