TPU Foot Pad for the [Prusa] Box enclosure by Printer Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU pad for the marvelous Prusa-Box enclosure by Printer Box [ https://www.printer-box.com/ ]
- Rating
- 4.833 / 5
- Likes
- 24
- Downloads
- 105
- Makes
- 6
- Views
- 995
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a TPU pad for the marvelous [Prusa]Box enclosure by Printer Box
https://www.printer-box.com/
I've designed this pad for two reasons:
- The enclosure wil be less slippy on there feet
- It could also avoid the transmission of vibration to the desk or shelve on which the enclosure rests
Christian Refle settings for Sunlu TPU:
0.20 mm layer
3 Outlines
Infill 20 %
Thanks to Christian Refle for the pictures because I haven't printed these pads yet, as I'm waiting for the delivery of a TPU roll in order to do so ;-)
Edit: I've received my Eryone TPU roll and printed these pads and here are my settings for Eryone TPU Shore 95A:
0.20 mm layer
2 Outlines
Infill 15 %
Nozzle Temp. 230-220°C
Bed Temp. 60-70°C
Max speed 25 mm/s
(Last picture added is a pad I've printed)
----------------------------------------------------------------------------------------------------------------
Voici un tampon TPU pour le fantastique caisson [Prusa]Box de Printer Box
https://www.printer-box.com
J'ai modélisé ce tampon pour deux raisons :
- Les pieds du caisson seront moins glissants
- Ce tampon peut aussi éviter la transmission des vibrations au bureau où à l'étagère sur lequel est posé le caisson
Paramètres de Christian Refle pour le TPU Sunlu
Couche 0.20 mm
3 Périmètres
Remplissage 20 %
Merci à Christian Refle pour les photos car je n'ai pas encore imprimés ces tampons étant donné que j'attends la livraison d'une bobine de TPU pour pouvoir le faire ;-)
Edition : J'ai reçu ma bobine de TPU Eryone Shore 95A et j'ai donc imprimé ces tampons, voici les paramètres que j'ai utilisé :
0.20 mm layer
2 Périmètres
Remplissage 15 %
Température Buse 230-220°C
Température Lit 60-70°C
Vitesse maxi 25 mm/s
(Dernière photo ajoutée montre un tampon que j'ai imprimé)