UBIQUITI WiFi Nao/Giga Beam - Wall Mount (PC)

This is a Wall Mount for UBIQUITI WiFi antennas, the original FreeCAD file is attached for custom adaption. The file/print is not suitable for the Prusa Mini or not enclosed printers in case of printing it with PC/ASA/ABS at all 

You'll find the antennas here:

https://store.ui.com/collections/operator-airmax-and-ltu/products/gbe

https://www.ui.com/airmax/nanobeamm/

Some hints for printing this parts and PC:

I printed all with a MK3S+ in save environment have 30 °C in the enclosure. The following findings I'll share with you:

1. Clean the bed/plate precisely
2. Put on enough of the glue on the bed where you're positioning the parts - also for the skirt (I missed some spots, so the skirts starts moving during a print)
3. Check the skirt - for these parts it seems (also after my experience with the moving around skirt) that a skirt is not useful if you have a save printing environment - enclosure
4. Check that the brim has enough width
5. My first print was better than the second one, because it seems that aligning the parts diagonal on the bed is better than straight (you can change this in the g-code if you like).

Update Mar 01 2021: 

I updated all files due to some improvements twice (triggered by a few findings after the first successful print) - now the results are ok and the parts fit perfectly together. If you've downloaded already the files prior to this date, please update it.