UBIQUITI WiFi Nao/Giga Beam - Wall Mount (PC)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Wall Mount for UBIQUITI WiFi antennas Nano- and Giga Beam printed with PC on a MK3S+
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 76
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Wall Mount for UBIQUITI WiFi antennas, the original FreeCAD file is attached for custom adaption. The file/print is not suitable for the Prusa Mini or not enclosed printers in case of printing it with PC/ASA/ABS at all
You'll find the antennas here:
https://store.ui.com/collections/operator-airmax-and-ltu/products/gbe
https://www.ui.com/airmax/nanobeamm/
Some hints for printing this parts and PC:
I printed all with a MK3S+ in save environment have 30 °C in the enclosure. The following findings I'll share with you:
- Clean the bed/plate precisely
- Put on enough of the glue on the bed where you're positioning the parts - also for the skirt (I missed some spots, so the skirts starts moving during a print)
- Check the skirt - for these parts it seems (also after my experience with the moving around skirt) that a skirt is not useful if you have a save printing environment - enclosure
- Check that the brim has enough width
- My first print was better than the second one, because it seems that aligning the parts diagonal on the bed is better than straight (you can change this in the g-code if you like).
Update Mar 01 2021:
I updated all files due to some improvements twice (triggered by a few findings after the first successful print) - now the results are ok and the parts fit perfectly together. If you've downloaded already the files prior to this date, please update it.